2×1250mm Metal Slitting Machine

2×1250mm Metal Slitting Machine is for slitting the mother steel coil to be strips and then recoiling to be some small steel coils. It can continuously run and has a high working efficiency.

We can especially design and manufacture the machine according to customers’ specific technical requirements.

A. Raw material

1.      Suitable material:    color steel sheet

2.      Stress:   σ_s≤235Mpa   σ_b≤500Mpa

3.      Thickness:    0.4～2mm

4.      Coil width:    ≤1250mm

5.      Coil ID:      Φ600

6.      Coil OD:     ≤Φ1400mm

7.      Coil weight:   ; ≤10T

B. Product parameter

1.      Max slitting quantity (not include waste edge):    

          0.4mm≤t≤1mm, max 14 Pieces

          1mm≤t≤2mm, max 8 Pieces

2.      Slitting width:         ≥20mm

3.      Width tolerance:       ≤±0.05mm

4.      Slitting straightness:    ≤±0.8mm/1000mm

5.      Recoiling ID:          Φ600mm

6.      Recoiling OD:         ≤Φ1400mm

C. Equipment parameter

1.      Slitting speed:          ≤30m/min

2.      Power source:           380V, 50Hz, 3P

3.      Total power:            60kw

4.      Main driving motor:  leveling motor        AC4kw

                                             Slitting motor        AC7.5kw

                                            Recoiling motor      DC22kw

5.      Machine size(L×W×H): about 13m×7m×3m

6.      Direction:                          From right to left

7.      Machine color:    according to customer’s requirement

Coil feed →Decoiling →Guide →Slitting →Loop →Tensile → Recoiling →Output

2×1250mm Metal Slitting Machine is mainly used to level the sheet and slit sheet according to customer’s requirement and then recoil the strips. The detail components of this machine please refer to below.