4×1500mm Slitting Machine for Steel Coil

4×1500mm Steel Coil Slitting Machine is for slitting the mother steel coil to be strips and then recoiling to be some small steel coils. It can continuously run and has a high working efficiency.

We can especially design and manufacture the machine according to customers’ specific technical requirements.

A. Raw material

1.      Suitable material:  Low carbon panel

2.      Stress:   σ_s≤250Mpa   σ_b≤500Mpa

3.      Thickness:    0.2～4.0mm

4.      Coil width:    ≤1500mm

5.      Coil ID:       Φ508+10-40,Φ610+10-40

6.      Coil OD:      Φ1000～Φ1800mm

7.      Coil weight:    ≤25T

B. Product parameter

1.      Finished product quantity (excluding wasted edges):

0.6mm≤thickness≤4.0mm, Max. 16 pcs

2.      Width:               ≥30mm

3.      Width tolerance:       ≤±0.05mm

4.      Recoiler I.D:          Φ508mm

5.      Recoiler O.D:          ≤Φ1800mm

C. Equipment parameter

1.      Slitting speed: ≤120m/min

2.      Power source: 380V, 60Hz, 3P, 5wire

3.      Total power:    300kw

4.      Main driving motor:

5 rollers leveling machine motor    AC22kw

Slitter motor:                   DC132kw

Recoiler:                       DC132kw

5.      Machine size(L×W): about 28m×13.5m

6.      Direction: Feeding from left, and output to right (From The Operation Side)

7.      Machine color: according to customer’s requirement

8.      Operator requirement: 1 technical worker and 2 common workers

Coil feeding → Decoiling → leveling →Head cutting → Conveying → Guiding →Slitting →Conveying → Tensioning → Recoiling → Output

4X1500mm Steel Coil Slitting Machine is mainly used to level the sheet and slit sheet according to customer’s requirement and then recoil the strips. The detail components of this machine please refer to below.